White Rabbit Node

WR Core Collection is a VHDL library containing the VHDL modules commonly used in White Rabbit ecosystem. Among these cores are:

WR PTP Core (WRPC) - White Rabbit implementation in a single HDL module
WR Streamers - transmit and receipt IP cores that transfer data over Ethernet transparently encapsulating them into Ethernet frames
Ideas for WR Forward Error Correction (FEC) Core - to be implemented.

15 March 2017

Contact

Tristan Gingold

Parent Projects

White Rabbit

White Rabbit provides **sub-nanosecond accuracy** and picoseconds precision of **synchronization** for large distributed systems

Related Projects

3.3V adapter for SVEC

A small PCB that generates 3.3 Volt so that a SVEC can work in older type of VME crates

BabyWR

**BabyWR** is being developed as a cost effective and small pluggable WR node

Compact Universal Timing Endpoint Based on White Rabbit with Artix7 - Cute-WR-A7

The Cute-WR-A7 is the enhanced version of the CUTE-WR-DP with an Xilinx Artix7 series FPGA

CompactRIO White Rabbit CRIO-WR

CRIO-WR is a standalone [White Rabbit](https://www.ohwr.org/project/white-rabbit/wiki) node implementation on a PCB with a form factor for National Instruments CompactRIO modules

DIOT non-rad-tol

The DI/OT System Board is one of the main components of the [Distributed I/O Tier project ecosystem](https://ohwr.org/project/diot/wikis/home)

FPGA and ARM SoC FMC Carrier FASEC

This card is a carrier for two low pin count FPGA Mezzanine Cards (VITA 57) with additional 200 kSPS bipolar analog inputs, Ethernet connectivity and fail-safe functionality

High Performance MTCA.4 White Rabbit Receiver

The HP WR Timing Receiver is composed by two MTCA eRTM (Rear Transition Module) modules: - Digital board (WR node), sitting in the slot 14

HPSEC - High Precision Slaved External Clock

The aim of this project is to upgrade the performance of White Rabbit devices to a level suitable for the Metrology purposes by interfacing the White Rabbit devices to a high precision, ultra stable 10 MHz Oven Controlled Crystal Oscillator (OCXO)

Mini-WR

By push the fibre-optic SFP connector to its carrier board, Mini-WR makes itself the **SMALLEST** [White Rabbit Node](https://www.ohwr.org/project/white-rabbit/wikis/node) implementation and gives flexibility for connector/panel arrangement on the carrier board

PXIe FMC Carrier Board - SPEXI7U

The SPEXI7U PXIe FMC carrier card was developed in the framework of the SAMBUCA (Sensors Acquisition and Motion Control system) project

Simple PCIe FMC carrier SPEC

The FMC PCIe Carrier is an FMC carrier that can hold one FMC card and an SFP connector

Simple PXIe FMC Carrier SPEXI

The PXI express FMC Carrier Board (SPEXI) is the PXI express version of the [SPEC board](https://www.ohwr.org/project/spec)

Simple VME FMC Carrier 7 - SVEC7

The FMC VME Carrier is an FMC carrier in VME64x format that can hold two FMC cards and an SFP connector

Simple VME FMC Carrier SVEC

The FMC VME Carrier is an FMC carrier in VME64x format that can hold two FMC cards and an SFP connector

Software for White Rabbit PTP Core

White Rabbit PTP Core(WRPC) Software runs on a Lattice Mico 32 soft-core processor implemented as part of [WRPC Gateware](https://www.ohwr.org/project/wr-cores/wikis/Wrpc-core)

SPEC150

This is the same card as the [SPEC FMC carrier](https://www.ohwr.org/project/spec/wikis) where a larger FPGA is used.<br/> This larger version is notably required when one needs White Rabbit support with the [FMCADC100M](https://ohwr.org/project/fmc-adc-100m14b4cha/wikis) ADC mezzanine card

SPEC7

**The FMC PCIe Carrier called SPEC7 is an FMC carrier that can hold one FMC card and an SFP connector.** This board uses a Xilinx Zynq FPGA with Dual-Core ARM processor integrated and is optimised for low jitter and cost and is usable with most of the FMC cards designed within the OHR project (e.g

VME FMC Carrier - VFC-HD

The VFC-HD is an Intel Arria V based VME64x carrier for one High Pin Count (HPC) FPGA Mezzanine Card (FMC, VITA 57)

See All News